KNACRO 1200W 20A super power constant voltage constant current module/solar boost controller/battery charging module 12V/24V/36V/48V/60V/72V DC 10V-60V to 12V-80V Step Up Power Supply
Free Shipping Included! KNACRO 1200W 20A super power constant voltage constant current module/solar boost controller/battery charging module 12V/24V/36V/48V/60V/72V DC 10V-60V to 12V-80V Step Up Power Supply by KNACRO at EMF Help. MPN: 1200W 20A. Hurry! Limited time offer. Offer valid only while supplies last. Module Properties: non-isolated step-up module (BOOST). Input voltage: 10-60V. Input Current: 20A. Quiescent current: 15mA (12V liter 20V, the
Input voltage: 10-60V.
Input Current: 20A.
Quiescent current: 15mA (12V liter 20V, the output voltage, the higher the current will increase too quiet).
Output voltage: 12-80V continuously adjustable.
Output Current: 20A MAX, more than 12A, please enhance heat dissipation (input, output pressure related, the greater the pressure the smaller the output current).
Constant Range: 0.3~20A.
Output Power:=Input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W. input 36V * 20A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W.
Working temperature: -40 to + 85 degrees (ambient temperature is too high, please enhance heat dissipation).
Operating frequency: 150KHz.
Conversion efficiency: up to 95% (efficiency and input and output voltage, current, pressure related).
Overcurrent protection: Yes (with reduced flow adjustment, adjustable output current limit, current exceeds the current limit, the output current is automatically reduced to a minimum 5A, vary according to the nature of the load current will be.).
Short circuit protection: Yes (input 30A fuse) double short circuit protection, the use of more security.
Input reverse polarity protection: None, (if necessary, please enter the string into the diode).
Output Counter filling: Yes, for charging plus blocking diode is not required.
Installation: four 3mm screws.
Connection: solderless terminals output.
Module dimensions: 85mm(length) * 63mm(width) * 64mm(height).
Weight: 300 g.
Package Include: 1 x 1200W 20A DC Converter Boost Step-up Power Supply Module IN 10-60V OUT 12-83V.
Features & Highlights
- Large heat sink design , supports a wide input voltage 10-60V, 12-83V wide adjustable output voltage, low dropout voltage.
- Using four 63V / 470UF high-frequency low-impedance electrolytic capacitors, output 3 100V / 470UF electrolytic capacitor. 33mm Super Power Kool magnetic ring with three 1.2MM of copper wire and wound to prevent magnetic saturation temperature of the flow through the case.
- The back four where two high-power tube is 140A / 100V current switching power MOS two 30A / 100V freewheeling Schottky.
- Using a 116mm * 58mm * 14mm aluminum radiator heat. 5015 fan and heat sink (5mm * 5mm * 15mm) mounting holes; import power management chip output voltage and current are continuously adjustable.
- If you need more power, you can use two modules in parallel, such as the output to 30A, two modules can be used in parallel.
|Part Number:||1200W 20A|
|Package Weight:||0.6 pounds|
|Package Size:||6.06 x 1.81 x 1.81 inches|